کاربر kosos1v

عضوی به مدت 4 روز (از 25 بهمن 1398)
عنوان کاربری: کاربر عضو
نام کامل:
موقعیت:
وبسایت: http://www.howfit-press.com/blanking-machine/blanking-press-machine/
درباره: Product Parameter锛?/strong>
Model: DDL-300T
Brand: Howfit
Accuracy: JIS Special Grade
Price: Negotiation
Nominal press capacity: 300 Tons
Capacity occur point: 2.0 mm
Stroke: 30mm
Stroke per minute: 100-450 s.p.m
Bolster area: 2300脳1000 mm
Bed opening: 1900脳300 mm
Slide Area: 2300脳900 mm
Die height adjustment stroke: 400-450 mm
Die height adjustment motor: 1.5 kw
Linear height: 210卤15
Main motor: 55 kw
Total weight: 60 Tons
Outline Dimension: 3550脳2100脳5180 mm
Structure:
Press products:
Product Introduction锛?/strong>
High Speed Precision Blanking Press Machine
Lamination for Automobile Motor
An automobile is a wheeled motor vehicle used for transportation. Most definitions of car say they run primarily on roads, seat one to eight people, have four tires, and mainly transport people rather than goods. Cars came into global use during the 20th century, and developed.
Measures must be taken to prevent die breakage. For precision punch press, besides the stamping force of the processing center, as an advantageous method to improve the deformation ability of the front part of the processing material, there are two auxiliary pressure generating devices to generate hydrostatic pressure. One is the Y-shaped ring protruding on the pressing plate designed along the outline of the part, because about 50% of the blanking pressure is used to press on the material being processed, which is called the ring pressing plate. The other is to apply about 25% of the main blanking pressure on the end of the product's returner, which is called back pressure. These three pressures do not interfere with each other, and the size and shape of each pressure are synchronized. They must be suitable for the processing requirements of forming and blanking, and can be adjusted arbitrarily. In addition, the processing speed must be adjusted according to the requirements of the forming or blanking objects. The structure of the die not only requires simplicity and light weight, but also is suitable for use. When processing thick plates, there is no obvious deformation for the die which is prone to deformation because of the central support. Even in the blanking process, the workpiece is squeezed into the die. If the feeder recedes, the die is supported by the center. If the hydraulic piston is connected to the side of the ring pressing plate and the piston recedes, the inner side of the ring pressing plate of the die is still supported by the central bearing, so the rigidity will not be destroyed at any time.Blanking Press Machine manufacturers
website:http://www.howfit-press.com/blanking-machine/blanking-press-machine/

فعالیت توسط kosos1v

امتیاز: 120 امتیاز (رتبه بندی #37)
سوالات: 1
پاسخ ها: 0
دیدگاه ها: 0
آمار امتیازدهی: 0 سوال, 0 پاسخ
امتیازات ارسال شده: 0 امتیازات مثبت, 0 امتیازات منفی
امتیازات دریافت شده: 0 امتیازات مثبت, 0 امتیازات منفی

دیوار پروفایل kosos1v